Bianco INOX45 with Rainsaver Pump


Bianco INOX45S2MPCX pressure system pump with auto restart controller. Bianco RAINSAVERMK6 automatic mains/changeover device. Watermark approved for connections to all Town Water supplies. Safe against waterborne bacteria, dezincification and lead poisoning. Australian Owned and designed. The pump regulates flow and pressure and protects itself against voltage fluctuations and loss of water. The Bianco RAINSAVERMK6 can operate without power and can be located any distance from the pump, and even inside the rain water tank. AS/NZS4020 Drinking Water Approved.

The pump is a self-priming pressure system pump supplied wired and ready to install. The self-priming ability provides excellent suction capacity. Used especially for supplying water to domestic installations

The Pump is characterized by

  • Automatic electronic pump control fitted and wired.
  • Automatic electronic control provides run dry protection and constant pressure at low flows. Automatic electronic control has in-built check valve & auto restart.
  • Corrosion resistant pump body, diffuser and impeller.
  • Mechanical shaft seal.
  • 240 V single phase TEFC motor with in-built auto reset thermal overload.

RS6-INOX45S2MPCX Electrical data

  • Rated voltage: 240V
  • Mains frequency: 50 Hz
  • Current: 3.5 amps
  • Rated Output: 450W
  • Capacitor: 10 uF
  • Motor duty: Continuous
  • Motor type: Asynchronous, TEFC
  • Motor protection: In-built thermal overload
  • Ingress protection: IP X4
  • Insulation class: F
  • Power cable length: 2 m H05 3G1.0
  • Net weight: 11 kg
  • Liquid: Clean water temperature range: 2 – 40 °C
  • Materials: Pump body, Diffuser, Impeller: Stainless Steel, Technopolymer.
  • Mechanical seal: Carbon/Ceramic/ Nitrile,
  • O rings: Nitrile
  • Installation: Maximum ambient temperature: 40 °C
  • Maximum operating pressure: 6 bar
  • Dimensions: 420mm x 460mm x 230mm

 Applications

  • Used especially for supplying water to domestic installations and applications where a suction lift is required

Motor / power: 450W
Max. flow: 50T/min
Taps: 4 taps (calculated at 8lt/min)
Head: 38m
Suction hose diameter: 1″ / 25mm
Pressure: 380kPa
Body: Stainless Steel
Impeller: Technopolymer
Mechanical Seal : Carbon/Ceramic/Nitrile
Warranty on pump: 2 Years

AS/NZS 4020 Drinking Water Approved.